When I flew Beech 1900D’s for Skyway Airlines out of Milwaukee, we had a captain that was board by the time we had the gear in the wells. Probably because he had about 10,000 hours flying the ‘Beech Airliner’ around Wisconsin and da U. P. of Michigan. He had literally been there and done thatContinue reading “Are we there yet?”
Category Archives: Contour Sanding
Can we move on, please?!?
Today was my travel day back to work. But I woke up early enough to sand out the primer on the cowl and the epoxy wipe on the canard. Nothing new here. Have to add some spot putty then prime again. Sand, wash, rinse, repeat. Nothing to see here… Move along. On the way toContinue reading “Can we move on, please?!?”
I’m Over Finishing Work
VERY. OVER. IT! Putting stuff on parts only to sand most of it back off, rinse and repeat is getting old. Luckily I’m feeling like there is a light at the end of the tunnel. As of today, there are only 2 major components that haven’t seen any primer yet. The canopy and the mainContinue reading “I’m Over Finishing Work”
Lots of sanding
Today was all sanding. The good news is the canard is done, for now. The bottom side is smooth, but has a few ugly spots where the the underlying structure prints through the thin primer. If I get really ambitious I’ll put another coat on. Then I sanded out the cowl epoxy wipe. It isContinue reading “Lots of sanding”
Sitting on the job
Today stared with cleaning up the fuselage and vacuuming up all of the dust as well as cleaning off the canopy. The canopy had quite a bit of dust on it form all the sanding going on. All of this was in preparation for Sean, of Top Stitch Upholstery, to come over to work onContinue reading “Sitting on the job”
Go-on-git! Ugly Betty is no longer welcome here.
I went to bed early last night in order to get some rest so I could wake up early this morning, well early for me. It was one cup of coffee, really not enough, then out to the Garaggio. I finished the strake to longeron intersections and spent quite a bit of time with the spot putty,Continue reading “Go-on-git! Ugly Betty is no longer welcome here.”
Honey, I’m home
Now get to sanding. Just did a couple hours today as it was an early morning and about 2500 miles in the sky. Sanded and added spot putty in the strake to longeron intersections. Primer tomorrow, among a few other things that will be exciting. Stop back tomorrow night.
Half day before work
Since I didn’t get the fuselage ready for primer yesterday, I decided to get up early and get a half day of work in sanding before I had to leave for work. Greg was available, so he came over to help. We concentrated on finishing the sanding on the epoxy wipe on the fuselage andContinue reading “Half day before work”
“Those Days”
Today was one of, “those days.” I got home late enough last night that it really was this morning. I didn’t get out to the shop as early as I would have liked because not only did I need the sleep, but I had to play plumber. The water heater decided to start leaking yesterdayContinue reading ““Those Days””
Snooze
I hit snooze, oh about 6 or 8 times this morning. I just did not want to get out of bed. I’m not a morning person by any stretch of the imagination, but I needed to get just a little bit more done before I went back to work. So the plan was to sandContinue reading “Snooze”
the Garaggio 