The last post we started a right side lower aft engine cowl, say that 5 times fast, and got it to a point where the foam shape mostly replicated the left side. Since then, I spent a bit more time adding, sanding, and shaping foam using my handy templates derived of 3D scanning to improveContinue reading “About to layup Lower Aft TCSN1”
Tag Archives: Drywall Mud
Rear Engine Top Cowl
This is going to be a bit of a longer post, so please bear with me. I am going to try to get the blog up to date as of today, then keep it current going forward…. WHAT??? It could happen. As I mentioned in a previous blog post, the cowls don’t fit. Neither frontContinue reading “Rear Engine Top Cowl”
More Catchup on the Blog…
I am continuing my effort to catch the blog up to the progress of the airplane. There will be a lot of photos here and sparse detail since I want to get current on the blog and get to some of the more exciting things, so here are some more updates. After getting the panelContinue reading “More Catchup on the Blog…”
Pour Foam/Sand, Repeat, Drywall Mud/Sand, Repeat
It seems that I haven’t been able to get much time in the workshop lately, and when I do that I don’t get much done. This cowl fabrication has been consuming my brain power, and I have not been able to give much thought to working on other parts of the airplane. In the lastContinue reading “Pour Foam/Sand, Repeat, Drywall Mud/Sand, Repeat”
the Garaggio 