I learned from last nights mistakes and didn’t push it today. I had time constraints, so I decided I wasn’t going to push an end of day priming session, and either screw it up or be late. Good news is, Jon and Greg were able to come over to help today, so we still got aContinue reading “Learning has occurred”
Tag Archives: plans built
Sand off, prime on
Had to leave for work today, so only got a few hours in the shop. I sanded off the spot putty from yesterday. Then sanded the left wing out. Washed, dried, and put another coat, two passes, of primer on. I wanted to do three, but ran out of time. More next week.
A Bite of the Elephant…. Ear
Today’s workshop session was cut short. Kevin and I had plans to go to the, “Great Minnesota Get Together,” aka the Minnesota State Fair. Well known for its food selection, you can pretty much get anything you want to eat. Most novelty foods come on a stick. One of the foods there is the Elephant Ear.Continue reading “A Bite of the Elephant…. Ear”
Canardgate Day 63
My trip today starts at 2300 in Phoenix, so that gave me some time in the morning to work on the airplane. Yea, more sanding on the canard. I spent a lot of time on the elevator slot today which is where the contour need the most work. The elevator slot involves lots of detailContinue reading “Canardgate Day 63”
The Gang’s all here
Not only has it been a while since I have been in the workshop, but my regular helpers have been missing in action for a while too. Both due to their own reasons. But today, both Jon and Greg were able to be in the Garaggio with me. It really jumpstarted the return to progressContinue reading “The Gang’s all here”
Multiple layups with Jon
For the first time in a long time, Jon and I were able to coordinate our schedules and get time in the workshop together. We started up where Greg and I left off yesterday. There were a few things to finish prep sanding on, as well as some masking to do. Then we used floxContinue reading “Multiple layups with Jon”
the Garaggio 