Hosed

It was a short session today in the workshop, but I was hosed from the get go. Literally, and figuratively. in accordance with a suggestion from Scott Spencer, I decided to seal the ends of the fire sleeve with RTV to prevent the fibers from wicking up oils, solvents, etc. They make a product toContinue reading “Hosed”

DING Firewall is done

That pretty much sums it up. Today we deburred the stainless firewall, then bent the tabs on the left and right sides of the center firewall. Since there is a step from the firewall to spar, we bent down the edges to provide protection to the edges of the plywood firewall and make the transitionContinue reading “DING Firewall is done”