Workshop time was limited to about an hour and a half today due to the “Tuesday in Fall” airline schedule reductions. Which meant I had to leave on the 11:30 flight today instead of the 2:30 flight to get to work. So I found a small project to work on. The front seam on theContinue reading “Garaggio time cut short”
Tag Archives: seams
Operation Prime, Part Duce
Its been a couple days since the last post, and I did get to work on the airplane for a short while sanding three days ago. There was not much to show for it so forgive me for not putting up a blog post and another picture of a microed surface that still needs work.Continue reading “Operation Prime, Part Duce”
Operation Prime
Yesterday I finished with simulator training for work and completed my checkride. I am now type rated on the Airbus 320. More importantly, being done with the sim means I get some time at home, and thus time in the Garaggio. Both Jon and Greg were able to come by and help today. It was 70Continue reading “Operation Prime”
Canopy Blues
Jon Myers had the day off, so he came over to help keep me motivated to sand. Which is kind of an oxymoron because if there is one thing he dislikes about this project, it is the sanding. We basically kept going where Greg and I left off yesterday. I continued on the cowl andContinue reading “Canopy Blues”
Thank you Followers!
Thank you to all of you who stop by here on a regular basis. Today the Garaggio hit 10,000 views. I think that is pretty cool. We have 35 subscribed viewers who get an email every time I make a post, and probably many more who just stop by from time to time. If youContinue reading “Thank you Followers!”
Re-run
You know that feeling when you are all excited to watch your show on TV for the night. Then you realize it is a re-run. Not only is it a re-run, but it is a re-run of the least desirable episode. That was today in the Garaggio. You guessed it, yet more contour sanding ofContinue reading “Re-run”
Man-daide
Airplanes bite, and that’s a fact! Any builder who says otherwise either hasn’t taken delivery of their kit, or haven’t thumbed through the plans yet… paper cuts count too. I myself have been on the receiving end and gotten a few wounds to prove it. Today was one of those days. I was maybe a bit overzealous when IContinue reading “Man-daide”
Social time in the Garaggio
Yesterday was another one of those days. I am home from training and I was able to kill two birds with one stone. I was fortunate enough to have my good friend Michael in the shop an not only spend time with him, but make some progress. You may remember that I have had a partContinue reading “Social time in the Garaggio”
The day I look Forward to for NINE Months, and MVP
Winter in Minnesota lasts… well it lasts a long time. I have to keep the workshop doors closed after the temperature dips below about 70 degrees during the day. This is necessary to keep the epoxy and work surfaces/substrates warm enough that epoxy will wet out properly and layups will fully cure. Normally that meansContinue reading “The day I look Forward to for NINE Months, and MVP”
Less and Less time for the Garaggio…
More and more time studying and preparing to leave for a few weeks of Airbus training. I also had a bunch of things to do for the AirVenture Cup today, so I didn’t get to the Garaggio until Greg was able to come over in the afternoon. Having people come over to work with meContinue reading “Less and Less time for the Garaggio…”
the Garaggio 