I learned from last nights mistakes and didn’t push it today. I had time constraints, so I decided I wasn’t going to push an end of day priming session, and either screw it up or be late. Good news is, Jon and Greg were able to come over to help today, so we still got aContinue reading “Learning has occurred”
Tag Archives: winglet
Sand off, prime on
Had to leave for work today, so only got a few hours in the shop. I sanded off the spot putty from yesterday. Then sanded the left wing out. Washed, dried, and put another coat, two passes, of primer on. I wanted to do three, but ran out of time. More next week.
Finally, the Garaggio delivers its first part
The big news from the Garaggio for today is we delivered our first ‘OPP’ part. I promised Vic that I would have Deb’s hot tub part done by the time we had our brew session today. So I prioritized working on that piece. After all, I have only had it laying on the bench forContinue reading “Finally, the Garaggio delivers its first part”
Smear the…
Today was the day to smear the top of the left wing. I am still amazed at just how much of a visual transformation it is to have a large surface all white. I am so very thankful for how much time Greg has been putting in with me lately. He was here from 0900Continue reading “Smear the…”
Wipe ’em Wangs
Today I continued the wing finishing on the bottom of the left wing. For about 5 hours in the workshop, there is not a lot to report. There was a corner of the aileron/wing gap that needed to be widened just slightly, so I took care of that. Then the aileron was removed. I thenContinue reading “Wipe ’em Wangs”
the Garaggio 